Attention shall be paid to vehicle modification: do not damage the original circuit of the vehicle. The auto self-ignition incident involves the modification of the car, 99% of which is caused by the destruction of the car starting line. The original automobile manufacturer will not be responsible for compensation for the spontaneous combustion accident caused by the destruction of the automobile starting line. The insurance company may refuse to pay for the self-ignition of the car after the circuit modification, even if it is insured against self-ignition. Therefore, when installing automotive electronic equipment, do not damage the original circuit of the vehicle, and choose products with direct power supply system.
The importance of automobile starting line
The wiring of brake disc vehicle is generally single-wire system. The electric equipment is connected in parallel and the negative pole is grounded. The lines are distinguished by lines and numbers of different colors, and are divided into several trunk lines with the ignition switch as the center. The starting current on the starting line of the automobile power supply system is the largest. Because of the inductive reactance, the instantaneous current of the general automobile starting is about 100A, and the output current at low temperature starting is as high as 250A-300A. If the displacement of the engine is large, the starting current will increase correspondingly, and 300 to 500A current is required at the moment of starting.
Hazards of breaking the car starting line
The starting current of the starting line in the automobile power supply system is very high. If the starting line is damaged, the spark may be generated at the skin damage of the strong current line, which will ignite the combustible substances or oil and gas in the dry air and cause spontaneous combustion. In addition, breaking the starting line to connect power will change the original circuit of the vehicle, which will increase the circuit load and destroy the stable state of power supply. Although the power supply of the original circuit system has a safety device, it only ensures the safety within the pressure range of the original circuit of the circuit system. According to statistics, 99% of auto spontaneous combustion is caused by the destruction of the original vehicle line system, which has great safety hazards.
The rights and interests of car owners are not guaranteed when the starting line is broken.
At present, all major insurance companies have self-ignition insurance. It is recommended that a private car that has been driving for more than 3 years should be insured. However, it is worth noting that if the car is modified in terms of circuit, even if you have insured the insurance, once the car ignites, the insurance company may refuse to pay compensation. The consequences of spontaneous combustion caused by breaking the starting line shall be borne by the customer. The 4S store does not provide warranty. The original manufacturer will not make any compensation for the accident caused by this situation.
When adding electronic equipment products to the car, it is better not to choose the products that change the original circuit system, especially the brake disc. The car seat air conditioning products produced by a company in Beijing are actually directly powered by the car starting line, which inevitably destroys the original circuit power supply system of the car. The hazards and hidden dangers can be imagined.
Battery dedicated power supply, stable voltage and current, safe and guaranteed
Connecting power from the battery will not damage the original circuit of the car, and form a parallel connection with the on-board circuit. The special line power supply will not cause the load on the original circuit, stabilize the voltage and current, and ensure the personal and vehicle safety of the car friends.
The seat air conditioning system of Shenzhen "comfortable driving" car is designed to be powered directly by the battery, which ensures the safety of both people and property. Of course, if a user does not install according to the wiring requirements of the product instructions, and connects the power from the starting line by himself, resulting in a spontaneous combustion accident, it is due to the customer's own behavior, not the product design safety factor, and the responsibility should also be borne by the customer.
When refitting and selecting additional electronic products, the first brake disc should first consider whether the added products threaten the performance and safety of the whole vehicle. When it comes to refitting the automobile circuit, it is better to select the product that does not damage the original vehicle system circuit and uses the battery special line for power supply in combination with the automobile circuit power supply principle, so as to ensure the personal and property safety.. Now the company mainly produces and processes brake discs of various large passenger cars and heavy trucks. It can be processed and customized according to different requirements of customers. Brake disc and brake disc washer products are exported to domestic and foreign markets, and are highly praised by customers.